Single Girder Electric Overhead Travelling Crane

Overview:Single girder electric overhead travelling cranes-also known as single girder EOT crane or single beam overhead cranes, are our most popular type of overhead cranes, as they provide the most cost-effective lifting solution for all capacities 0.5ton to 20tonnes and upto 31.5mtr span for indoor or outdoor applications.

获取报价

Introduction
Parameter
Specifications

Single girder electric overhead travelling cranes-also known as single girder EOT crane or single beam overhead cranes, are our most popular type of overhead cranes, as they provide the most cost-effective lifting solution for all capacities 0.5ton to 20tonnes and upto 31.5mtr span for indoor or outdoor applications.
Single girder electric overhead travelling cranes are widely used in machining, machine assembly, equipment maintenance and warehouse and other work occasions. They are mainly composed of main beam, end beam, electric hoist, trolley running mechanism, electrical equipment and other parts. Single girder electric overhead cranes have the advantages of compact structure, good rigidity, flexible operation, beautiful modeling, safety and reliability, often used in conjunction with CD1, MD1 electric hoist.

6 sets single girder electric overhead cranes for machining lifting at customer's plant in China.

Item	Parameter
Standard Capacity	1t/2t/3t/5t/10t/16t/20t or customized on demand
Span length:	7.5m-31.5m
Lifting height:	6m/9m/12m/18m/24m/30m
Work duty	A3/A4
Rated voltage	220V/380V/400V/415V/660V, 50-60Hz, 3ph AC
Crane control mode	Floor control / Remote control / Cabin room control
Traveling speed:	0-30m/min

Main Girder		Main girder is the main bearing part of the crane, its structure is made of U-shaped groove, inclined cover plate, rib plate and I beam steel plate, its upper arc is ((1/1000～1.4/1000)S, when the rated lifting weight and the hoist's self-weight are located in the middle of the span, the degree of camber caused is not lower than the horizontal line, and there is no permanent deformation during normal operation.
End Girder		End girder is located at both ends of the main beam, is bolted to the main beam by flange plats. It's box structure, composed of U-shaped groove, lower cover plate, reinforcement plate, and rib plates formed by steel plate rolling or welded steel plates. The end girder has the characteristics of light structure, good rigidity, beautiful appearance and good welding performance.
Electric Hoist		Electric hoist is to be used on single girder overhead crane, each electric hoist will perform dynamic and static load test, rise and drop pressure tests. The baking paint process is adopted to enhance the adhesion of the paint film and improve the appearance quality. Assembly line ensures product quality.
Crane Driving Device		The box and cover of the driving device are cast from HT200 gray iron with good vibration resistance. After aging treatment, they are processed and manufactured on the lathe by special clamps. The gear and gear shaft are forged by 40Cr die forging, and are made by turning, hobbing, tempering and grinding. The hardness of heat treatment is HB235-269.
Crane Motor		The crane motor adopts ZDY(D) series cone rotor brake motor or soft starter motor. The standard motor insulation class is B and the protection class is IP44. The motor has the characteristics of good heat dissipation, long service life, safety and reliability. Special working conditions can be customized.
Crane Wheel		The wheel set is formed by die forging of 45# steel, processed by rough machining, quenching, tempering, and finishing. The heat treatment hardness is HB300～380, and the hardness is not less than HB260 at 15mm depth of hardened layer. The wheel axle is made of 45# steel, which is processed by rough machining, quenching and tempering, and fine machining. The heat treatment hardness is 235～269HB.
Hook Blocks		The hook blocks meet the standard GB/T1005.1～5-98, its material is DG20, safety factor is greater than 5; Hook surface is smooth and has no defects such as cracks, folding, overburning etc.; there are no internal cracks, white spots and other effects that affect the safety. The hook is equipped with an anti-decoupling device to prevent the wire rope from decoupling to ensure the hook safety and reliability during use.
Electrical Cabinet		Our standard power supply is three phase, 380V (±10%, the lower limit of peak current is -15%), 50Hz. According to customer requirements, the power supply can be designed as a three-phase electrical control system under 690V and frequency 50-60HZ.
Control Mode		Pendant panel, Remote control, Cabin control. The crane can also be equipped with two sets of operating devices, namely: ground + remote control or driver's cab + remote control. However, due to safety issues, the two operating modes can only be switched and cannot be used at the same time. The control circuit voltage is generally AC 36V safe voltage.
End Stop Bumper		JHQ-C series polyurethane buffer has super anti-collision ability and good buffering effect. Simple structure, long service life, convenient installation and maintenance.